EOP4
4xE1 to Ethernet Gateway
OPNET’s EOP4 and/or MSAN system offer a carrier class solution for extending traditional E1 services over Ethernet type network. The device converts the data stream coming from its TDM ports into Ethernet packets that are encapsulated using TDMoverIP method and forwarded over IP/Ethernet.
EOP4 offers point-to-point or point-to-multipoint synchronization for leased line applications.
EOP4 provides 3 Gigabit Ethernet ports(1x Optical and 2x LAN) for connectivity to IP/Ethernet networks.
Management is performed locally by a terminal, or remotely via Telnet, SSH, or SNMP.
EOP4 offers point-to-point or point-to-multipoint synchronization for leased line applications.
EOP4 provides 3 Gigabit Ethernet ports(1x Optical and 2x LAN) for connectivity to IP/Ethernet networks.
Management is performed locally by a terminal, or remotely via Telnet, SSH, or SNMP.
- E1 leased line services over Ethernet type data network
- Up to 4xE1 leased line services per node, with different end destinations
- Point-to-point transmission over optical fiber
- Local/Remote accessible
- Rich and user friendly EMS features via SNMP management
- Compacted design for easy desk top or standard rack installation
- Compatible with OPENT’s MSAN TDM leased line units
Point-to-point E1 Leased Lines
TDM E1 Leased Line over IP/Ethernet Network
High Capacities E1 Leased Line Network Up to 300 E1 Leased Lines per GE Trunking
Ethernet Interface
- 1x GE optical (SFP-Slot) + 2x 10/100/1000BaseT Ethernet
- Per port granular Ingress/Egress Bandwidth Control
- Port Base VLAN & 4K 802.1Q VLAN Group.
- Supports flexible QinQ
- Supports 33 MIBs Counters
- 1M Bits on-chip buffer memory
- Supports 10K Bytes Jumbo Frame.
- Supports IEEE802.3az
- Support port rate limit
Subscriber Line Interface
- 24-port VDSL2 Subscriber line
- Bidirectional VDSL2 connection interfaces with max. of 100Mbps speed.
- Loop test supported (SELT)
- Impulse noise protection
E1 Interface
- 4 channel TDM E1 ports
- Comply with ITU-T G.703
- Framed / unframed E1 with LOS/AIS detection
- Hardware-based adaptive clock recovery, Recovered clock jitter compliant to ITU-T G.823
- Independent configurable jitter buffer depth to compensate up to 256ms of Packet Delay Variation
- Complies with IEFT draft standard for SAToP (IETF RFC4553)
- Point-to-Point and Point-to-Multipoint operation
- Provide lost packets processing and compensation due to PSN impairment
Operation
- Dimensions (WxDxH) : 228mmx203mmx34.5mm
- Rack Mounting Panel (WxDxH) : 482mmx52mmx44mm
