PS-67

• Complies with ITU-T G.991.2 Annex A and B.
• Flexible user interface, T1/E1, V.35, V.36, RS-449, EIA530, X.21 DTE, 10/100BaseT Ethernet Interface selection.
• T1 speed is n x 64 Kb/s, n=1 to 24 for 1 pair and 2 pairs.
• E1 speed is n x 64 Kb/s, n=1 to 32 for 1 pair and 2 pairs.
• DTE/LAN speed of n x 64 Kb/s, n=1 to 36 for 1 pair.
• DTE/LAN speed of n x 64 Kb/s, n=1 to 72 for 2 pairs.
• Cross over detectable capacity for 2 pair system.
• Performance monitoring feature for on-line quality monitor.

• Loopback and test pattern for on-site trouble shooting.
• V.54 remote loopback function implemented.
• Each unit can be configured to STU-C or STU-R mode.
• Each unit can be configured to sealing source or sink.
• Standalone model applies LCD panel for greater efficiency.
• GUI SNMP-based and remote Telnet Network Management System to centrally manage PS-67 system.
• Designed to support Remote Power Feeding (Option)

G.shdsl Interface

• Number of pair: One pair or two pairs
• Line Rate: N x 64 Kb/s (Data rate) + 8 Kb/s (Overhead) + 8 Kb/s
  (for T1 interface only)N = 3~36
• Data Rate:
  The PS-67 supports symmetric multiple 64 Kb/s operation
  which includes
  • 1 pair : data rate - 64 to 2304 Kb/s
  • 2 pair : data rate - 64 to 4608 Kb/s
  as according to different interfaces (T1/E1/DTE/Ethernet).
• Frame Structure: Complies with ITU-T G.991.2 section 7.1.1
• Modulation Method: 16-TCPAM
• Impedance: Nominal 135Ω ± 5%
• Total Output Power
  • The STU-C and STU-R support power backoff function and the power backoff levels comply with Table 6-2 of ITU-T Rec. G.991.2.
  • The symmetric PSD of STU-C and STU-R complies with ITU-T Rec. G.991.2 PSD masks.



T1 Interface

• Line Rate : 1544 Kb/s ± 32 ppm.
• Data Rate : N x 64 Kb/s, N = 1~24.
• Frame Format : SF, ESF or Unframed.
• Line Code : AMI or B8ZS.
• Impedance : 100 Ω± 5%, balanced.
• Pulse Shape : Complies with mask of ITU G.703.
• Power Level : For an all-one transmitted signal, the power in 3 kHz band centered at 772 kHz shall be between 12.6 and 17.9 dBm. The power in 3 KHz band centered at 1544 kHz shall be at least 29 dB below that at 772 kHz.
• Jitter : Complies with ITU G.823 Jitter requirement.

E1 Interface

• Line Rate : 2048 Kb/s ± 50 ppm.
• Data Rate : N x 64 Kb/s, N = 1~32.
• Frame Format : Unstructured or Structured framing.
• Line Code : HDB3 or AMI.
• Impedance : 120 Ω± 5%, balanced.
• 75Ω± 5%, unbalanced.
• Pulse Shape : Complies with mask of ITU G.703.
• Jitter : Complies with ITU G.823 Jitter requirement.



DTE Interface

• Interface Type : V.35, V.36, EIA530, RS449, X.21.
• Data Rate : N x 64 Kb/s, N = 1~36 (one pair) , N = 1~72 (two pairs)



Ethernet Interface

• Ethernet Interface : 10/100BaseT auto sensing and 10M/100M half/full Duplex configurable Ethernet interface with auto MDIX Ethernet interface.
• Electrical Characteristics : complies with IEEE 802.3/IEEE 802.3u.
  Bridge Capacity : Supports up to 2048 MAC learning addresses with 4-layer hashing algorithm and Bridge filter function.
• Encapsulation format : HDLC.
• Data Rate : N x 64 Kb/s, N = 1~36 (one pair) , N = 1~72 (two pairs)
• Throughput : Non-blocking full Packet Rate.

Environment

• Shelf and Standalone type: 0 ~ 60°C, up to 95% non-condensing relative humility
• Power Supply
  • Shelf type : -36 ~ -72 Vdc
  • Standalone : -36 ~ -72 Vdc, 90~260Vac or dual DC and AC power without external adapter
• Regulations
  • EMC : CISPR 22 Class A, FCC Part 15 Subpart B, Class A
  • Surge : IEC 1000-4-5 Class 2
• Dimensions
  • Shelf type : 222mm x 437mm x 306mm (HxWxD)
  • Standalone : 40mm x 200mm x 300mm (HxWxD)



Performance Monitoring Management

• SHDSL Interface
  • Current and 32 records of 15 minute LOSWS, ES, SES and UAS.
  • Current and 7 records of 24 hour LOSWS, ES, SES and UAS.
• T1/E1 Interface
  • Current and 96 reocrds of 15 minute LCV, ES, SES and UAS.
  • Current and 7 records of 24 hour LCV, ES, SES and UAS.



Fault Management

• SHDSL Interface
  • LOSW alarm.
  • SNR, loop attenuation and Performance Monitor cross over threshold.
• T1/E1 Interface
  • LOS, LOF, AIS and RAI alarm.
  • Performance Monitor cross over threshold.
• DTE and Ethernet Interface : Disconnection alarm.



 

Maintenance Management

• SHDSL Interface
  • Local loopback
  • Remote loopback
  • Test pattern and BER meter
• T1/E1 Interface
  • Local loopback
  • Remote loopback
  • Test pattern and BER meter
• DTE/Ethernet Interface
  • Local loopback
  • Remote loopback
  • Test pattern and BER meter
  • V54 In_Band loopback code function

Distance